3 Phase 22.5 KVA

22.5 kVA, 3 Phase, Lister Petter powered, open standby generating set with 90 litre fuel tank, Crossley alternator and remote start/stop controller.


Specifications

  • Power Rating: 22.5 kVA
  • Alternator Model: Crossley SLG Series
  • Engine Model: LISTER PETTER TR3
  • Starter Voltage: 12 V
  • Frequency: 50 Hz
  • Cylinder No.: 3
  • Cubic Capacity: 2.32 L
  • Bore / Stroke: 98 x 102 mm
  • Compression Ratio: 15.5 : 1
  • Aspiration: Natural
  • Flywheel Max. Cont. Power: 15.8 kW
  • Starting System: Electric
  • Fuel Tank Capacity: 90 L
  • Approx. Fuel Consumption (1hr cont.): 4.6 L/hr
  • Approx. Fuel Consumption (1hr standby): 5.1 L/hr
  • Fuel Type: Diesel
  • Diam.: 1400 x 760 x 1200 mm (L x W x H)
  • Weight: 480 kg

Build Schedule

Standby: kVA @ 0.8p.f. These ratings are applicable for supplying continuous electrical power (at variable loads) in the event of a utility power failure. No overload is permitted on these ratings. Minimum output from alternators are peak continuous rated*

Continuous: kVA @ 0.8 p.f. Available for continuous electrical output. There is no hour limitation. 10% overload is available 1 hour in 12. The generating set and this specification is designed for environmental conditions of up to 27°C, up to 152.4m above sea level and up to 60% relative humidity.

Contact us for ratings outside the specified range.

Control System

Key start/stop with following meters:

  • Oil Pressure, Oil Temp, Motor Temp, Frequency, Volts and Amps
  • Shut Down for low oil
  • Emergency stop button
  • Output circuit breaker

Accessories

  • Muffler, stainless steel exhaust flex (20 kVA and above) and clamps, battery and leads, day fuel tank.
  • Oil and coolant (within engine).
  • Circuit breaker and display for Amps, Volts and Frequency for all sets.

Options

  • Mains failure control system instead of standard remote control system with mains failure relay, and static battery charger (mains supplied).
  • Changeover contactors in separate cubicle.
  • Constant potential (static) battery charger fitted to key start/stop system or remote start/stop system.
  • Jacket Heater – Thermostatically controlled heater supplied and fitted to maintain engine coolant temperature at approximately 40°C.