3 Phase 50 KVA

50 kVA, 3 Phase Standby Generating Set with John Deere engine, 130 litre fuel tank and remote start/stop controller. Optional canopy available.


Specifications

  • Power Rating: 50 kVA
  • Alternator Model: Crossley SLG Series
  • Engine Model: John Deere 4045D
  • engine speed: 1500 rpm
  • Starter Voltage: 12 V
  • Frequency: 50 Hz
  • Cylinder No.: 4
  • Cubic Capacity: 4.5 L
  • Bore / Stroke: 106 x 127 mm
  • Compression Ratio: 17.2 : 1
  • Aspiration: Natural
  • Flywheel Max. Cont. Power: 42.5 kW
  • Combustion Air Flow: 3.1 m3/min
  • Cooling Air Flow: 117 m3/min
  • Heat Rejection to Cooling System: 38 kW
  • Exhaust Gas Flow: 8 m3/min
  • Exhaust Gas Temperature: 540 °C
  • Approx. Fuel Consumption (1hr cont.): 12.8 L/hr
  • Approx. Fuel Consumption (1hr standby): 14 L/hr
  • Fuel Type: Diesel
  • Diam.: 2100 x 980 x 1400 mm (L x W x H)
  • Weight: 1000 kg

Build Schedule

Standby: kVA @ 0.8 pf These ratings are applicable for supplying continuous electrical power (at variable loads) in the event of a utility power failure. No overload is permitted on these ratings. Minimum output from alternators are peak continuous rated (as defined in 1SO 8528-3 @ 27°C. Annual hour limitation: 500 hours).

Continuous: kVA @ 0.8 pf. (Divide standby rating by 1.1). Available for continuous electrical output. There is no hour limitation. 10% overload is available 1 hour in 12. The generating set and this specification is designed for environmental conditions of up to 27°C, up to 152.4 m above sea level and up to 60% relative humidity. Ratings at 0.8 pf.
For ratings outside this range, please contact us.

Control System

Standard Fitting: Starting is remote or local to the machine – close contacts to start, open contacts to stop.
Key start/stop with following meters:

  • Oil Pressure, Oil Temp, Motor Temp, Frequency, Volts and Amps
  • Shut Down for low oil
  • Emergency stop button
  • Output circuit breaker

Accessories

  • Muffler, stainless steel exhaust flex (20 kVA and above) and clamps, battery and leads, day fuel tank.
  • Oil and Coolant (within engine).
  • Circuit breaker and display for Amps, Volts and Frequency.

Options

  • Muffler, stainless steel exhaust flex (20 kVA and above) and clamps, battery and leads, day fuel tank.
  • Oil and Coolant (within engine).
  • Circuit breaker and display for Amps, Volts and Frequency.

Canopy Options

CB-Canopy

All W&C canopies are made out of galvanised steel and are powder coated to offer you weather protection and to prolong the life of your generator. Our canopies have a unique soundproof insulation for quieter performance and are designed for easy maintenance and transportation.

Canopy No: CB
Noise Level @ 1m: 80 dBA
Total Weight: 1700 kg (including Genset)
Dimensions (L x W x H): 2860 x 1000 x 1760 mm
Exhaust protrudes 300mm above canopy. Allow 800 mm width access to open canopy doors.