3 Phase 860 KVA

860 kVA, 3 Phase Standby Generating Set with Doosan engine, 600 litre fuel tank and remote start/stop controller. Optional canopy available.


  • Power Rating: 860 kVA
  • Alternator Model: Crossley SLG Series
  • Engine Model: DOOSAN DP222LC
  • Starter Voltage: 24 V
  • Frequency: 50 Hz
  • Cylinder No.: 12 TI
  • Cubic Capacity: 21.927 L
  • Bore / Stroke: 12 x 142 mm
  • Compression Ratio: 15:1
  • Aspiration: Turbo & Aftercooled
  • Flywheel Max. Cont. Power: 723 kW
  • Combustion Air Flow: 45 m3/min
  • Cooling Air Flow: 860 m3/min
  • Heat Rejection to Cooling System: 487 kW
  • Exhaust Gas Flow: 108 m3/min
  • Exhaust Gas Temperature: 600 °C
  • Fuel Tank Capacity: 600 L
  • Approx. Fuel Consumption (1hr cont.): 161 L/hr
  • Approx. Fuel Consumption (1hr standby): 172 L/hr
  • Fuel Type: Diesel
  • Diam.: 3500 x 1500 x 2200 mm (L x W x H)
  • Weight: 4500 kg

Build Schedule

Standby: kVA @ 0.8 pf These ratings are applicable for supplying continuous electrical power (at variable loads) in the event of a utility power failure. No overload is permitted on these ratings. Minimum output from alternators are peak continuous rated (as defined in 1SO 8528-3 @ 27°C. Annual hour limitation: 500 hours).

Continuous: kVA @ 0.8 pf. (Divide standby rating by 1.1). Available for continuous electrical output. There is no hour limitation. 10% overload is available 1 hour in 12. The generating set and this specification is designed for environmental conditions of up to 27°C, up to 152.4 m above sea level and up to 60% relative humidity. Ratings at 0.8 pf.

For ratings outside this range, please contact us.

Control System

Standard Fitting: Starting is remote or local to the machine – close contacts to start, open contacts to stop.

Key start/stop with following meters:

Oil Pressure, Oil Temp, Motor Temp, Frequency, Volts and Amps
Shut Down for low oil
Emergency stop button
Output circuit breaker


Muffler, stainless steel exhaust flex (20 kVA and above) and clamps, battery and leads, day fuel tank.
Oil and Coolant (within engine).
Circuit breaker and display for Amps, Volts and Frequency.


Mains failure control system instead of standard remote control system with mains failure relay, and static battery charger (mains supplied).
Changeover contactors in separate cubicle.
Constant potential (static) battery charger fitted to key start/stop system or remote start/stop system.
Jacket Heater – Thermostatically controlled heater supplied and fitted to maintain engine coolant temperature at approximately 40°C.

Canopy Options


All W&C canopies are made out of galvanised steel and are powder coated to offer you weather protection and to prolong the life of your generator. Our canopies have a unique soundproof insulation for quieter performance and are designed for easy maintenance and transportation.

Canopy No: No 6
Noise Level @ 1m: TBA
Total Weight: 6550 kg (including Genset)
Dimensions (L x W x H): 5120 x 1660 x 2400 mm
Exhaust protrudes 300mm above canopy. Allow 1100 mm width access to open canopy doors.